REAR DOOR BELT MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. REMOVE REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  2. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP

    1. B372452C01
      V100155

      Protective Tape

      Apply protective tape around the rear door glass outer weatherstrip.

    2. B371106

      Using a moulding remover, disengage the 2 claws.

    3. Using a moulding remover, disengage the 4 clips and remove the rear door glass outer weatherstrip.