AIR CONDITIONING SYSTEM


  1. CONSTRUCTION


    1. The combustion type power heater (heater and accessory assembly) consists mainly of a heater exchanger, a glow plug, a motor, an air fan, an ECU, an engine coolant temperature sensor, an overheating prevention sensor, a flame sensor, an intake pipe, an exhaust pipe and a fuel pump.

    2. This heater is installed between the engine and heater radiator unit sub-assembly. The engine coolant from the engine flows through the spiral passage around the heat exchanger and flows into the heater radiator unit sub-assembly. At this time, the glow plug ignites the air and fuel in the combustion chamber of the heat exchanger, and the resultant heat of combustion heats the engine coolant.

      A00YYQMC01
      *1 ECU *2 Motor
      *3 Combustion Chamber *4 Fuel Pump Assembly
      *5 Exhaust Pipe *6 Heat Exchanger
      *7 Overheating Prevention Sensor *8 Heater Switch Assembly
      *9 Engine *10 Heater Radiator Unit Sub-assembly
      *11 Intake Pipe *12 Engine Coolant Temperature Sensor
      *a Intake Air *b Exhaust Gas
      A00YY4MC01
      *1 Flame Sensor *2 Glow Plug
      *3 Air Fan - -
      *a To Heater Radiator Unit Sub-assembly *b From Engine
      *c Engine Coolant Flow *d Fuel