ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. B005UHGC06
      *a Engine hood close
      *b Engine hood open
      *c

      Component without harness connected

      (Engine Hood Courtesy Switch (Hood Lock Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A6-1(E) - A6-2(+) Open 10 kΩ or higher
      A6-1(E) - A6-2(+) Close Below 1 Ω

      If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).