PRE-COLLISION SYSTEM, Diagnostic DTC:C1A63
| DTC Code | DTC Name |
|---|---|
| C1A63 | Other System Malfunction |
DESCRIPTION
The pre-collision city sensor receives accelerator pedal position sensor signals from the ECM and determines whether acceleration is requested by the driver. When the ECM detects a malfunction in the accelerator pedal position sensor, the pre-collision city sensor is notified via CAN communication and this DTC is output.
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
C1A63 |
With the ignition switch ON, the pre-collision city sensor receives an accelerator pedal position sensor malfunction signal from the ECM for approximately 5 seconds or more. |
|
PROCEDURE
GO TO SFI SYSTEM OR ECD SYSTEM
Tip:If DTC C1A63 is output by the pre-collision system, perform troubleshooting for the SFI system or ECD system.
SFI System:
-
for 1ZR-FAE:
for 2ZR-FAE:
ECD System:
Table 1. Result Proceed to
NEXT
END