DIESEL THROTTLE BODY (w/ EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01E1YJ

      Remove the 3 bolts, 2 nuts and engine cover.

  3. REMOVE INTERCOOLER ASSEMBLY WITH INTAKE AIR CONNECTOR


    1. A01DY9J

      Detach the 2 clamps.

    2. Disconnect the vacuum hose from the manifold absolute pressure sensor.

    3. Disconnect the IAT sensor connector and manifold absolute diesel pressure sensor connector.

    4. A01DXPG

      Loosen the 2 hose clamps of the No. 1 air hose.

    5. A01DV5L

      Loosen the 2 hose clamps of the No. 2 air hose.

    6. A01DZT1

      Remove the 4 bolts and intercooler.

  4. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01DV7U

      Disconnect the 2 connectors.

    2. A01E33K

      Remove the 2 bolts, 2 nuts, throttle body and gasket.