UPPER INSTRUMENT PANEL REASSEMBLY

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. Attach the 2 claws to install the cooler thermistor (solar sensor).

  2. INSTALL LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System)


    1. Attach the guide and 2 claws to install the light control switch hole cover.

  3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)


    1. Attach the 2 claws to install the automatic light control sensor.

  4. INSTALL NO. 2 INSTRUMENT PANEL CUSHION

    A01E2Y4

    1. Clean the instrument panel surface.

    2. Align a new No. 2 instrument panel cushion with the markings on the upper instrument panel and install the No. 2 instrument panel cushion to the position shown in the illustration using double-sided tape.

  5. INSTALL NO. 3 INSTRUMENT PANEL CUSHION

    A01E269

    1. Clean the instrument panel surface.

    2. Align a new No. 3 instrument panel cushion with the markings on the upper instrument panel and install the No. 3 instrument panel cushion to the position shown in the illustration using double-sided tape.

  6. INSTALL NO. 4 INSTRUMENT PANEL CUSHION

    A01DYXC

    1. Clean the instrument panel surface.

    2. Align a new No. 4 instrument panel cushion with the markings on the upper instrument panel and install the No. 4 instrument panel cushion to the position shown in the illustration using double-sided tape.

  7. INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY

    Tech Tips

    Use the same procedure for both instrument panel cup holders.


    1. Install the instrument panel cup holder with the 3 screws <B>.

  8. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Attach the 4 claws to install the No. 2 instrument panel register.

  9. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel register.

  10. INSTALL METER MOUNTING BRACKET


    1. Install the meter mounting bracket with the screw <B>.

  11. INSTALL NO. 1 DEFROSTER NOZZLE OPENING PLATE (w/o Defroster)


    1. Attach the 6 claws to install the No. 1 defroster nozzle opening plate.

  12. INSTALL NO. 2 DEFROSTER NOZZLE OPENING PLATE (w/o Defroster)

    Tech Tips

    Use the same procedure described for the No. 1 defroster nozzle opening plate.

  13. INSTALL INSTRUMENT PANEL DOOR (w/o Front Passenger Airbag)


    1. Attach the 2 guides and 8 claws to install the instrument panel door.

    2. Install the 2 screws <B>.