CLEARANCE WARNING ECU(for Hatchback LHD, Wagon LHD) REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click hereClick hereClick hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click hereClick here

  4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click hereClick here

  5. REMOVE ECU INTEGRATION BOX RH

    Click hereClick hereClick hereClick here

  6. REMOVE CLEARANCE WARNING ECU ASSEMBLY

    1. E262599

      Disengage the 2 claws and remove the clearance warning ECU assembly.