REAR BRAKE DISASSEMBLY

PROCEDURE

1. REMOVE REAR DISC BRAKE PISTON

   1. for Type B:

      1. 

         Using SST, remove the rear disc brake piston by turning it counterclockwise.

         09719-12010

         Note:

         • Do not damage the rear disc brake piston.

         • Do not allow any brake fluid to spatter.

2. REMOVE CYLINDER BOOT

   1. for Type A:

      1. 

         *a	Protective Tape

         Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the rear disc brake cylinder and rear disc brake piston.

         Note:

         Be careful not to damage the rear disc brake cylinder or rear disc brake piston.

   2. for Type B:

      1. Remove the cylinder boot from the rear disc brake cylinder.

3. REMOVE PISTON SEAL

   1. for Type B:

      1. 

         *a	Protective Tape

         Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the rear disc brake cylinder.

         Note:

         Do not damage the inner surface or piston seal groove of the rear disc brake cylinder.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

5. REMOVE REAR DISC BRAKE BLEEDER PLUG