NAME PLATE(for Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Table 1. Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate or Emblem

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE

  1. INSTALL SYMBOL EMBLEM

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new symbol emblem.

    3. Remove the release paper from the symbol emblem.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Engage the 2 pins and install the symbol emblem as shown in the illustration.

      B350745C01

      *a

      Location pin

      -

      -

  2. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 1 luggage compartment door name plate.

    3. Remove the release paper from the No. 1 luggage compartment door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 1 luggage compartment door name plate as shown in the illustration.

      B350746C01

      *a

      Profile of Luggage Compartment Door Panel

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      152 mm (5.98 in.)

      B

      39 mm (1.54 in.)

      C

      37.7 mm (1.48 in.)

      D

      15.5 mm (0.610 in.)

      E

      15.7 mm (0.618 in.)

      F

      23.1 mm (0.909 in.)

      G

      45.9 mm (1.81 in.)

      -

      -

  3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 2 luggage compartment door name plate.

    3. Remove the release paper from the No. 2 luggage compartment door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 2 luggage compartment door name plate as shown in the illustration.

      B350747C01

      *a

      Profile of Luggage Compartment Door Panel

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      202.2 mm (7.96 in.)

      B

      28.8 mm (1.13 in.)

      C

      23.8 mm (0.937 in.)

      D

      12.2 mm (0.480 in.)

      E

      14.6 mm (0.575 in.)

      -

      -

  4. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 7 luggage compartment door name plate.

    3. Remove the release paper from the No. 7 luggage compartment door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 7 luggage compartment door name plate as shown in the illustration.

      Tip:

      Use the same procedure for both No. 7 luggage compartment door name plates.

      for 1.6 with XLi Plate:

      B411072C01

      *a

      Profile of Luggage Compartment Door Panel

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      111.2 mm (4.38 in.)

      B

      1 mm (0.0394 in.)

      C

      6.3 mm (0.248 in.)

      D

      33 mm (1.30 in.)

      E

      12.6 mm (0.496 in.)

      F

      33.4 mm (1.31 in.)

      G

      168 mm (6.61 in.)

      H

      93 mm (3.66 in.)

      for 1.6 with GL-i Plate:

      B411073C01

      *a

      Profile of Luggage Compartment Door Panel

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      111.2 mm (4.38 in.)

      B

      1 mm (0.0394 in.)

      C

      8 mm (0.315 in.)

      D

      37 mm (1.46 in.)

      E

      16.2 mm (0.638 in.)

      F

      36.9 mm (1.45 in.)

      G

      170 mm (6.69 in.)

      H

      91 mm (3.58 in.)