CRANKSHAFT POSITION SENSOR (w/o EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE NO. 2 ENGINE UNDER COVER

  4. REMOVE CRANKSHAFT POSITION SENSOR

    A01DZC3

    1. Disconnect the sensor connector.

    2. Remove the 3 clips, bolt and sensor.