TRANSMITTER BATTERY (w/o Smart Entry and Start System) REPLACEMENT

Note

Take extra care when handling these precision electronic components.


  1. REMOVE TRANSMITTER BATTERY


    1. B007UHTE01
      Text in Illustration
      *1 Protective Tape

      Twist a screwdriver in the direction of the arrow in the illustration, and open the transmitter housing cover.

      Note

      Do not forcibly pry open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B007SBJ

      Remove the door control transmitter module set.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

    3. B007P00

      Twist a coin in the direction of the arrow in the illustration and detach the 7 claws to remove the transmitter battery cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

    4. B007UME

      Remove the battery (lithium battery: CR2016).

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may become damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may cease to work.

  2. INSTALL TRANSMITTER BATTERY


    1. B007VLP

      Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. B007OUI

      Attach the 7 claws to install the transmitter battery cover.

    3. B007R1U

      Install the door control transmitter module set.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

    4. B007U0Q

      Install the transmitter housing cover to the transmitter housing case.