CURTAIN SHIELD AIRBAG ASSEMBLY ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the curtain shield airbag assemblies.

PROCEDURE

  1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)

    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the curtain shield airbag assemblies installed on the vehicle.

      1. The defects are as follows:

        • Cuts on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies

        • Small cracks on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies

        • Significant discoloration on each pillar garnish or the roof headlining assembly around the curtain shield airbag assemblies

        OK

        No defects are found.

        Tip:

        If any of the defects is found, replace each pillar garnish or the roof headlining assembly with a new one.

  2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the curtain shield airbag assemblies installed on the vehicle.

      1. The defects are as follows:

        • Cuts on the curtain shield airbag assemblies

        • Small cracks on the curtain shield airbag assemblies

        • Significant discoloration on the curtain shield airbag assemblies

        • Cracks or other damage to the connector

        OK

        No defects are found.

        Tip:

        If any of the defects is found, replace the curtain shield airbag assembly with a new one.