SEAT BELT CONTROL ECU INSTALLATION

PROCEDURE


  1. INSTALL SEAT BELT CONTROL ECU


    1. for LHD:


      1. A005A6V

        Engage the 2 claws to install the seat belt control ECU.

    2. for RHD:


      1. A005AX8

        Engage the 2 claws to install the seat belt control ECU.

  2. INSTALL ECU INTEGRATION BOX RH (for LHD)

    Click here

  3. INSTALL ECU INTEGRATION BOX LH (for RHD)

    Click here

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL DECK FLOOR BOX RH

    Click here

  8. INSTALL REAR DECK FLOOR BOX

    Click here

  9. INSTALL NO. 1 DECK BOARD

    Click here

  10. INSTALL NO. 2 DECK BOARD

    Click here

  11. INSTALL DECK BOARD ASSEMBLY

    Click here