SHIFT LEVER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 1 SPEAKER WITH BOX ASSEMBLY (w/ ASC System)

    Click here

  2. REMOVE CONSOLE BOX ASSEMBLY (w/o ASC System)

    Click here

  3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. B00572N

      Disconnect the end of the transmission control cable assembly from the shift lever assembly.

    3. B0059UZC01
      *a Nut

      Rotate the nut of the transmission control cable assembly clockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.

  4. REMOVE SHIFT LEVER ASSEMBLY


    1. B0057ANC01
      *a Shift Lock Control ECU Connector
      *b Transmission Control Switch Connector

      Disconnect the transmission control switch connector.

    2. Disconnect the shift lock control ECU connector.

    3. Disconnect the 2 clamps from the shift lever assembly.

    4. B0057NG

      Remove the nut from the shift lever assembly.

    5. B0059N7

      Remove the 4 bolts and shift lever assembly from the body.