POWER WINDOW CONTROL SYSTEM(w/ Jam Protection Function) SYSTEM DESCRIPTION

  1. POWER WINDOW CONTROL SYSTEM DESCRIPTION

    1. The power window control system controls the power window operation using the power window regulator motors. The main controls of this system are the power window regulator master switch assembly (mounted on the driver door), power window regulator switch assembly (mounted on the front passenger door) and rear power window regulator switch assemblies (mounted on the rear doors). Operating a window switch results in electrical power being transmitted to the corresponding power window regulator motor assembly.

  2. FUNCTION OF MAIN COMPONENTS

    The power window control system consists of the following components:

    Component

    Outline

    Power window regulator master switch assembly

    • Controls power window operation for all windows.

    • When window lock switch is pressed, window operation will be possible only for driver door power window.

    Power window regulator switch assembly

    • Located on front passenger door.

    • Controls front passenger window operation.

    • Rear power window regulator switch assembly LH

    • Rear power window regulator switch assembly RH

    • Located on rear doors.

    • Each switch controls window operation for its respective window.

    • Front power window regulator motor assembly LH (for LHD)

    • Front power window regulator motor assembly RH (for RHD)

    • Receives switch signals and changes signals into motor activation. As a result, window position changes.

    • Uses Hall-ICs built into regulator motor and the power window ECU to detect window position and jamming.

    • Front power window regulator motor assembly RH (for LHD)

    • Front power window regulator motor assembly LH (for RHD)

    • Rear power window regulator motor assembly LH

    • Rear power window regulator motor assembly RH

    Receives switch signals and changes signals into motor activation. As a result, window position changes.

  3. SYSTEM FUNCTION

    The power window control system has the following functions:

    Function

    Outline

    Manual up and down function

    • For driver door:

      Function that causes the window to go up while the power window regulator master switch assembly is being pulled halfway up and to go down while pushed halfway down. The window stops as soon as the switch is released.

    • For front passenger door and rear doors:

      Function that causes the window to go up while the power window regulator switch assembly or rear power window regulator switch assembly is being pulled up and to go down while pushed down. The window stops as soon as the switch is released.

    Driver door auto up and down function

    Function that enables the driver door window to be fully opened or closed by one full pull or push of the power window regulator master switch assembly.

    Window lock function

    • Function that disables the power window regulator switch assembly and rear power window regulator switch assemblies operations when the window lock switch is pressed.

    • The power window regulator switch assembly and rear power window regulator switch assemblies can be operated when the window lock switch is pressed again.

    Jam protection function (for driver door)

    Function that automatically stops the power window and moves it downward if foreign matter gets jammed in the door window during auto up or manual up operation.

    Remote control function

    Function that allows the power window regulator master switch assembly to control manual up and down operation of the front passenger door window and rear door windows.

    Key-off operation function

    • Function that makes it possible to operate all power windows for approximately 43 seconds after the ignition switch is turned off when the driver door or front passenger door has not been opened.

    • When 43 seconds have elapsed, or the driver door or front passenger door is opened after the ignition switch is turned off, the key-off operation function will be disabled.

    Tip:

    Even if the driver door or front passenger door is opened during auto window operation while the key-off operation function is on, the window will continue operating.

    Diagnosis

    Function that allows diagnosis of the power window control system if the power window ECU (built into power window regulator motor assembly [for driver door]) detects a malfunction in the system.

    Fail-safe

    • Function to disable part of power window control system functions if the pulse sensor in the power window regulator motor has a malfunction.

    • Auto up and down function is disabled.