PANORAMIC MOON ROOF SYSTEM Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION

According to the map light sub-assembly operation, the sliding roof drive gear sub-assembly (sliding roof ECU) operates its built-in motor. Using the map light sub-assembly, if the sliding roof glass can be operated normally when 45 seconds or more have elapsed since the engine switch was turned off, the key-off operation function may be abnormal.

CAUTION / NOTICE / HINT

Note


  • If the sliding roof drive gear sub-assembly (sliding roof ECU) is removed and reinstalled or replaced, the sliding roof drive gear sub-assembly (sliding roof ECU) must be initialized.

    Click here

  • The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

    Click here

  • If the main body ECU (multiplex network body ECU) is replaced, refer to the Service Bulletin.

PROCEDURE


  1. CHECK POWER WINDOW CONTROL SYSTEM


    1. Check if the key-off operation function of the power window control system operates normally.

      Click here

      OK
      The key-off operation function of the power window control system operates normally.
      Result
      Proceed to
      OK
      NG

    OK

    REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY Click here

    NG

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here