TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   1. Install the tire pressure warning ECU and receiver with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   2. Connect the connector.

2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

4. REGISTER TRANSMITTER ID

   Click here

5. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here

6. PERFORM INITIALIZATION

   Click here