AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) CD Sound Skips

PROCEDURE

1. CHECK CD

   1. 

      Check that the CD is not deformed or cracked.

   Result

   Proceed to
   No deformation or cracks on the CD
   Deformation or cracks on the CD

   Deformation or cracks on the CD

   CD IS DEFECTIVE

   No deformation or cracks on the CD

2. CHECK CD

   1. 

      Check the CD.

      Note:

      Do not use a conventional record cleaner or antistatic preservative.

      Tip:

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   Result

   Proceed to
   The CD is clean
   The CD is not clean

   The CD is not clean

   CLEAN CD

   The CD is clean

3. CHECK CD

   1. Replace the CD with a known good one and recheck that the malfunction disappears.

   Result

   Proceed to
   Malfunction disappears
   Malfunction appears

   Malfunction disappears

   END (CD IS DEFECTIVE)

   Malfunction appears

4. CHECK RADIO RECEIVER ASSEMBLY

   1. Check the radio receiver assembly installation condition.

      1. Check that the radio receiver assembly is properly installed.

   Result

   Proceed to
   Radio receiver assembly is properly installed
   Radio receiver assembly is not properly installed

   Radio receiver assembly is properly installed

   REPLACE RADIO RECEIVER ASSEMBLY

   Click hereClick hereClick here

   Radio receiver assembly is not properly installed

   REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY

   Click hereClick hereClick here