AFS OFF SWITCH INSPECTION

PROCEDURE

  1. INSPECT HEADLIGHT SWIVEL MAIN SWITCH (AFS OFF SWITCH)

    1. E136319C06

      *a

      Component without harness connected

      (Headlight Swivel Main Switch (AFS OFF Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      4 (MSW) - 1 (E)

      Headlight swivel main switch (AFS OFF switch) off

      10 kΩ or higher

      Headlight swivel main switch (AFS OFF switch) on

      Below 1 Ω

      If the result is not as specified, replace the headlight swivel main switch (AFS OFF switch).

    2. Illumination Inspection

      1. Apply battery voltage to the headlight swivel main switch (AFS OFF switch) and check that the switch illuminates.

        OK

        Condition

        Specified Condition

        Battery positive (+) → Terminal 3 (ILL+)

        Battery negative (-) → Terminal 2 (ILL-)

        Illuminates

        If the result is not as specified, replace the headlight swivel main switch (AFS OFF switch).