POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows) DATA LIST / ACTIVE TEST

  1. DATA LIST

    Tip:

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Data List.

    5. Read the Data List according to the display on the GTS.

      Body Electrical > Master Switch > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      D Door P/W Auto SW

      Driver door power window auto switch signal

      ON or OFF

      ON: Driver door power window auto switch being operated

      OFF: Driver door power window auto switch not being operated

      -

      P Door P/W Auto SW

      Front passenger door power window auto up and down switch signal

      ON or OFF

      ON: Front passenger door power window auto switch being operated

      OFF: Front passenger door power window auto switch not being operated

      -

      RR Door P/W Auto SW

      Rear RH door power window auto up and down switch signal

      ON or OFF

      ON: Rear RH power window auto switch being operated

      OFF: Rear RH power window auto switch not being operated

      -

      RL Door P/W Auto SW

      Rear LH door power window auto up and down switch signal

      ON or OFF

      ON: Rear LH power window auto switch being operated

      OFF: Rear LH power window auto switch not being operated

      -

      P Door P/W Up SW

      Front passenger door power window manual up switch signal

      ON or OFF

      ON: Front passenger door power window manual up switch being operated

      OFF: Front passenger door power window manual up switch not being operated

      -

      RR Door P/W up switch

      Rear RH door power window manual up switch signal

      ON or OFF

      ON: Rear RH power window manual up switch being operated

      OFF: Rear RH power window manual up switch not being operated

      -

      RL Door P/W up switch

      Rear LH door power window manual up switch signal

      ON or OFF

      ON: Rear LH power window manual up switch being operated

      OFF: Rear LH power window manual up switch not being operated

      -

      P Door P/W Down SW

      Front passenger door power window manual down switch signal

      ON or OFF

      ON: Front passenger door power window manual down switch being operated

      OFF: Front passenger door power window manual down switch not being operated

      -

      RR Door P/W Down SW

      Rear RH door power window manual down switch signal

      ON or OFF

      ON: Rear RH power window manual down switch being operated

      OFF: Rear RH power window manual down switch not being operated

      -

      RL Door P/W Down SW

      Rear LH door power window manual down switch signal

      ON or OFF

      ON: Rear LH power window manual down switch being operated

      OFF: Rear LH power window manual down switch not being operated

      -

      Window Lock Switch Status

      Window lock switch signal

      ON or OFF

      ON: Window lock switch LOCK position

      OFF: Window lock switch UNLOCK position

      -

      Number of Trouble Codes

      Number of trouble codes

      Min.: 0 or Max.: 255

      Number of DTCs will be displayed

      -

      Body Electrical > D-Door Motor > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      D Door P/W Auto SW

      Driver door power window auto switch signal

      ON or OFF

      ON: Driver door power window auto switch being operated

      OFF: Driver door power window auto switch not being operated

      -

      D Door P/W Up SW

      Driver door power window manual up switch signal

      ON or OFF

      ON: Driver door power window manual up switch being operated

      OFF: Driver door power window manual up switch not being operated

      -

      D Door P/W Down SW

      Driver door power window manual down switch signal

      ON or OFF

      ON: Driver door power window manual down switch being operated

      OFF: Driver door power window manual down switch not being operated

      -

      Number of Trouble Codes

      Number of trouble codes

      Min.: 0 or Max.: 255

      Number of DTCs will be displayed

      -

      Body Electrical > P-Door Motor > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      P Door P/W Auto SW

      Front passenger door power window auto switch signal

      ON or OFF

      ON: Front passenger door power window auto switch being operated

      OFF: Front passenger door power window auto switch not being operated

      -

      P Door P/W Up SW

      Front passenger door power window manual up switch signal

      ON or OFF

      ON: Front passenger door power window manual up switch being operated

      OFF: Front passenger door power window manual up switch not being operated

      -

      P Door P/W Down SW

      Front passenger door power window manual down switch signal

      ON or OFF

      ON: Front passenger door power window manual down switch being operated

      OFF: Front passenger door power window manual down switch not being operated

      -

      Number of Trouble Codes

      Number of trouble codes

      Min.: 0 or Max.: 255

      Number of DTCs will be displayed

      -

      Body Electrical > RL-Door Motor > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      RL Door P/W Auto SW

      Rear LH door power window auto switch signal

      ON or OFF

      ON: Rear LH door power window auto switch being operated

      OFF: Rear LH door power window auto switch not being operated

      -

      RL Door P/W Up SW

      Rear LH door power window manual up switch signal

      ON or OFF

      ON: Rear LH door power window manual up switch being operated

      OFF: Rear LH door power window manual up switch not being operated

      -

      RL Door P/W Down SW

      Rear LH door power window manual down switch signal

      ON or OFF

      ON: Rear LH door power window manual down switch being operated

      OFF: Rear LH door power window manual down switch not being operated

      -

      Number of Trouble Codes

      Number of trouble codes

      Min.: 0 or Max.: 255

      Number of DTCs will be displayed

      -

      Body Electrical > RR-Door Motor > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      RR Door P/W Auto SW

      Rear RH door power window auto switch signal

      ON or OFF

      ON: Rear RH door power window auto switch being operated

      OFF: Rear RH door power window auto switch not being operated

      -

      RR Door P/W Up SW

      Rear RH door power window manual up switch signal

      ON or OFF

      ON: Rear RH door power window manual up switch being operated

      OFF: Rear RH door power window manual up switch not being operated

      -

      RR Door P/W Down SW

      Rear RH door power window manual down switch signal

      ON or OFF

      ON: Rear RH door power window manual down switch being operated

      OFF: Rear RH door power window manual down switch not being operated

      -

      Number of Trouble Codes

      Number of trouble codes

      Min.: 0 or Max.: 255

      Number of DTCs will be displayed

      -

      Body Electrical > Main Body > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      FR Door Courtesy SW

      Front door courtesy switch RH signal

      ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      -

      FL Door Courtesy SW

      Front door courtesy switch LH signal

      ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      -

      Communication D-Door Motor

      Connection status between front door window regulator assembly (for driver door) and main body ECU (multiplex network body ECU)

      OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -

      Communication P-Door Motor

      Connection status between front door window regulator assembly (for passenger door) and main body ECU (multiplex network body ECU)

      OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -

      Communication RR-Door Motor

      Connection status between rear door window regulator assembly (for RH door) and main body ECU (multiplex network body ECU)

      OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -

      Communication RL-Door Motor

      Connection status between rear door window regulator assembly (for LH door) and main body ECU (multiplex network body ECU)

      OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -

      Communication Master SW

      Connection status between power window regulator master switch assembly and main body ECU (multiplex network body ECU)

      OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      -

  2. ACTIVE TEST

    Tip:

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      CAUTION:

      Be careful to avoid injuries as this test causes vehicle parts to move. During the Active Test, the jam protection function will not operate.

      Body Electrical > D-Door Motor > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Power Window

      Power window

      OFF / UP / DOWN

      -

      Body Electrical > P-Door Motor > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Power Window

      Power window

      OFF / UP / DOWN

      -

      Body Electrical > RL-Door Motor > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Power Window

      Power window

      OFF / UP / DOWN

      -

      Body Electrical > RR-Door Motor > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Power Window

      Power window

      OFF / UP / DOWN

      -