OIL PUMP COMPONENTS
ILLUSTRATION
*A |
Type A |
*B |
Type B |
*1 |
FUEL DELIVERY PIPE SUB-ASSEMBLY |
*2 |
FUEL INJECTOR ASSEMBLY |
*3 |
FUEL TUBE SUB-ASSEMBLY |
*4 |
NO. 1 DELIVERY PIPE SPACER |
*5 |
THERMOSTAT |
*6 |
WATER INLET |
*7 |
WIRE HARNESS CLAMP BRACKET |
*8 |
NO. 2 FUEL PIPE CLAMP |
*9 |
INSULATOR |
*10 |
GASKET |
*11 |
O-RING |
- |
- |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*A |
Type A |
*B |
Type B |
*1 |
EXHAUST MANIFOLD |
*2 |
IGNITION COIL ASSEMBLY |
*3 |
NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
*4 |
GASKET |
*5 |
MANIFOLD STAY |
*6 |
DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY |
*a |
Diameter 18 mm (0.709 in.) |
*b |
Diameter 17 mm (0.669 in.) |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*A |
for CVT |
*B |
for Manual Transaxle |
*1 |
ENGINE OIL LEVEL DIPSTICK GUIDE |
*2 |
INTAKE MANIFOLD |
*3 |
NO. 1 WATER BY-PASS PIPE |
*4 |
NO. 3 WATER BY-PASS HOSE |
*5 |
VENTILATION HOSE |
*6 |
WATER BY-PASS HOSE |
*7 |
WATER INLET HOSE |
*8 |
ENGINE OIL LEVEL DIPSTICK |
*9 |
AIR TUBE |
*10 |
NO. 1 INTAKE MANIFOLD TO HEAD GASKET |
*11 |
INTAKE MANIFOLD STAY |
*12 |
O-RING |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
CYLINDER HEAD COVER GASKET |
*2 |
CYLINDER HEAD COVER SUB-ASSEMBLY |
*3 |
SEAL WASHER |
*4 |
GASKET |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
CRANKSHAFT PULLEY |
*2 |
NO. 1 CHAIN TENSIONER ASSEMBLY |
*3 |
TIMING CHAIN COVER OIL SEAL |
*4 |
TIMING CHAIN COVER SUB-ASSEMBLY |
*5 |
ENGINE MOUNTING BRACKET RH |
*6 |
BRACKET |
*7 |
OIL FILTER BRACKET |
*8 |
SEAL WASHER |
*9 |
WATER PUMP ASSEMBLY |
*10 |
O-RING |
*11 |
GASKET |
*12 |
STUD BOLT |
*13 |
BRACKET |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
 |
MP Grease |
★ |
Precoated part |
 |
Do not apply lubricants (to the threaded parts) |
- |
- |
ILLUSTRATION
*1 |
CHAIN SUB-ASSEMBLY |
*2 |
CHAIN TENSIONER SLIPPER |
*3 |
CRANKSHAFT TIMING SPROCKET |
*4 |
NO. 1 CHAIN VIBRATION DAMPER |
*5 |
NO. 2 CHAIN SUB-ASSEMBLY |
*6 |
NO. 2 CHAIN VIBRATION DAMPER |
*7 |
OIL PUMP DRIVE GEAR |
*8 |
OIL PUMP DRIVESHAFT GEAR |
*9 |
CHAIN TENSIONER PLATE |
*10 |
SPRING |
*11 |
O-RING |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
NO. 2 OIL PAN SUB-ASSEMBLY |
*2 |
OIL PUMP ASSEMBLY |
*3 |
OIL PAN DRAIN PLUG |
*4 |
GASKET |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*1 |
OIL PUMP COVER SUB-ASSEMBLY |
*2 |
OIL PUMP RELIEF VALVE |
*3 |
OIL PUMP BODY |
*4 |
OIL PUMP DRIVEN ROTOR |
*5 |
OIL PUMP DRIVE ROTOR |
*6 |
OIL PUMP RELIEF VALVE SPRING |
*7 |
OIL PUMP RELIEF VALVE PLUG |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |