POWER SLIDE DOOR MAIN SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL


    1. B007R8L

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. B007TXW

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  2. REMOVE PARKING BRAKE HOLE COVER


    1. B007PNV

      Detach the 6 claws and remove the parking brake hole cover.

    2. Disconnect each connector.

  3. REMOVE POWER SLIDE DOOR MAIN SWITCH


    1. B007TL7

      Detach the 2 claws and remove the power slide door main switch.