BACK DOOR OUTSIDE GARNISH REMOVAL

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. A005AWCE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the back door outside garnish sub-assembly.

    2. A005EAU

      Disconnect the connector.

    3. Remove the 4 nuts.

    4. A005F2M

      Using a moulding remover, disengage the 7 clips and remove the back door outside garnish sub-assembly.

    5. Remove the 7 clips (back door outside garnish clip) from the back door outside garnish sub-assembly.

    6. Remove the 4 gaskets from the back door outside garnish sub-assembly.

  6. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  7. REMOVE NO. 1 BACK DOOR EMBLEM

    Click here