NAME PLATE REMOVAL

CAUTION / NOTICE / HINT

Tip:

When removing the name plate or emblem, heat the vehicle body and name plate or emblem using a heat light.

Table 1. Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate or Emblem

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body, name plate or emblem excessively.

PROCEDURE

  1. REMOVE NO. 1 BACK DOOR NAME PLATE

    1. B370422C01

      *a

      Wooden Block

      *b

      Piano Wire
      V100155

      Protective Tape

      Put protective tape around the No. 1 back door name plate.

    2. Insert a piano wire between the vehicle body and No. 1 back door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the No. 1 back door name plate to the vehicle body.

      Note:

      Be careful not to damage the vehicle body.

    5. Remove the No. 1 back door name plate.

  2. REMOVE NO. 2 BACK DOOR NAME PLATE

    1. B370423C01

      *a

      Wooden Block

      *b

      Piano Wire
      V100155

      Protective Tape

      Put protective tape around the No. 2 back door name plate.

    2. Insert a piano wire between the vehicle body and No. 2 back door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire to separate the double-sided tape that holds the No. 2 back door name plate to the vehicle body.

      Note:

      Be careful not to damage the vehicle body.

    5. Remove the No. 2 back door name plate.