REAR SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. The rear trailing arm assembly, upper control arm assembly and rear No. 2 suspension arm assembly use stamped high-strength sheet steel to achieve weight reduction and high rigidity.

    2. The rear trailing arm assembly uses a bush with an outer tube in order to counter the longitudinal force effectively and achieve a high level of vehicle stability and steering response.

    3. The upper control arm assembly, rear No. 1 suspension arm assembly and rear No. 2 suspension arm assembly use bushes with outer tubes on their suspension member sides and ball bushes on their axle sides to ensure a high level of support rigidity.

      A01GGCXC01
      *a Cross Section of Rear Trailing Arm Assembly Installation Area *b Body Side
      *c Axle Side *d Cross Section of Rear No. 1 Suspension Arm Assembly Installation Area
      *e Suspension Member Side *f Cross Section of Rear No. 2 Suspension Arm Assembly Installation Area
      *g Cross Section of Rear Upper Control Arm Assembly Installation Area - -