HEADLIGHT ASSEMBLY(for HID Headlight) REPAIR

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

  • Make sure that the headlight assembly is not damaged.

PROCEDURE

  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH

    E269553

    1. Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note:

      After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. E269554

      Install the upper headlight protector retainer LH with the 2 screws.

  2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH

    E269555

    1. Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note:

      After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. E269556

      Install the lower headlight protector retainer LH with the 2 screws.