Remote Control System does not Operate

DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or wireless transmitter. Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof drive gear sub-assembly (sliding roof ECU) via LIN communication. The sliding roof drive gear sub-assembly (sliding roof ECU) receives the signals and activates the slide motor.

CAUTION / NOTICE / HINT

Note

The sliding roof key-linked function and sliding roof glass wireless transmitter-linked function are operative when the power window customize settings "Door Key P/W Up", "Door Key P/W Down" and "P/W Down W/Transmit" are set to "ON" using the GTS. (The default setting of each is "OFF".)
If the sliding roof drive gear sub-assembly (sliding roof ECU) is removed and reinstalled or replaced, the sliding roof drive gear sub-assembly (sliding roof ECU) must be initialized.

Click here
The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

Click here
If a sliding roof drive gear sub-assembly (sliding roof ECU) DTC is output, perform troubleshooting for the DTC first.

Click here
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

PROCEDURE

CHECK REMOTE CONTROL FUNCTION

Check the key-linked and wireless transmitter-linked functions.

Click here

Result

Result	Proceed to
The sliding roof glass does not operate by the wireless transmitter-linked function, but all of the power windows operate.	A
Both the power windows and sliding roof glass do not operate by the wireless transmitter-linked function.	B

A

REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY Click here

B

GO TO POWER WINDOW CONTROL SYSTEM Click here

PANORAMIC MOON ROOF SYSTEM Remote Control System does not Operate