PCV VALVE INSTALLATION

PROCEDURE

  1. INSTALL PCV VALVE SUB-ASSEMBLY

    1. Apply adhesive to 2 or 3 threads of the PCV valve sub-assembly.

      Adhesive

      Toyota genuine adhesive 1324, three bond 1324 or equivalent

    2. Using a 22 mm ball joint lock nut wrench, install the PCV valve sub-assembly.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

      Note:

      Use the formula to calculate special torque values for situations where ball joint lock nut wrench is combined with a torque wrench.

      Click hereClick hereClick hereClick hereClick here

    3. Connect the PCV hose to the PCV valve sub-assembly, and slide the clamp to secure it.

  2. INSTALL INTAKE MANIFOLD

    Click here