FRONT SEATBACK HEATER(for Sedan) INSPECTION

PROCEDURE

1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH

   1. 

      *a	Component without harness connected (Front Seatback Heater Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection	Condition	Specified Condition
      1 - 2	Always	1.00 to 1.22 Ω

      If the result is not as specified, replace the front seatback heater assembly LH.

2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH

   1. 

      *a	Component without harness connected (Front Seatback Heater Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection	Condition	Specified Condition
      1 - 2	Always	1.00 to 1.22 Ω

      If the result is not as specified, replace the front seatback heater assembly RH.