PRE-CRASH SAFETY SYSTEM OPERATION CHECK

  1. CHECK PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY

    1. Check pre-crash system cancel switch assembly (warning timing adjustment)

      B417332C01

      *a

      Far

      *b

      Medium

      *c

      Near

      -

      -

      1. Turn the ignition switch to ON.

      2. Operate the pre-crash system cancel switch to change the warning timing of the pre-crash safety system between 3 levels and check that the warning timing adjustment display on the multi-information display changes between "Far", "Medium" and "Near".

        Tip:

        • The warning timing setting is displayed for 6 seconds on the multi-information display.

        • "Medium" is the default setting.

    2. B403409C03

      *a

      PCS OFF Warning Light

      Check pre-crash system cancel switch assembly (system on/off)

      1. Turn the Ignition switch to ON.

      2. Press and hold the pre-crash system cancel switch assembly for 3 seconds or more and check that the PCS OFF warning light in the combination meter assembly illuminates and "Pre-Crash Safety OFF." is displayed in the multi-information display.

        Tip:

        If the ignition switch is turned off with the pre-crash safety system off, the system will turn on when the ignition switch is turned to ON again.