ROOF HEADLINING DISASSEMBLY

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B004FI5C01
      *1 Bulb Holder

      Disengage the 2 claws (A) and separate the bulb holder from the vanity light as indicated by the arrows, in the order shown in the illustration.

    2. Disengage the claw (B) to remove the vanity light assembly.

  2. REMOVE COAT HOOK

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B004EPW

      Disengage the 6 claws and remove the coat hook.

  3. REMOVE NO. 1 ROOF WIRE


    1. Remove the adhesive tape from the roof headlining assembly.

      B004EYYC01
      *A w/o Sliding Roof *B w/ Sliding Roof
      *C w/o Lane Departure Alert System without Rain Sensor *D w/o Lane Departure Alert System with Rain Sensor
      B008GB8 Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

      B004F9UC01
      *A w/o Sliding Roof *B w/ Sliding Roof

    3. w/o Sliding Roof:


      1. Disengage the 6 clamps and remove the No. 1 roof wire from the roof headlining assembly.

    4. w/ Sliding Roof:


      1. Disengage the 11 clamps and remove the No. 1 roof wire from the roof headlining assembly.