PRESSURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note


  • Be sure to read the "PRECAUTION" thoroughly before servicing.

    Click here

  • In order to prevent the battery from becoming fully depleted, connect the battery charger to the battery when turning the engine switch on (IG) to charge the battery.

  • Keep the power supply connected to prevent the GTS battery from becoming fully depleted.

PROCEDURE


  1. AIR SUSPENSION CONTROL PROHIBITED

    Click here

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. INSTALL HEIGHT CONTROL PRESSURE SENSOR


    1. B006G7O

      Disconnect the connector.

    2. B0069J9

      Remove the height control pressure sensor from the pneumatic tank with tube assembly.

    3. Remove the O-ring from the height control pressure sensor.