BLOWER UNIT DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 1 COOLER UNIT DRAIN HOSE


    1. B005SOA

      Remove the No. 1 cooler unit drain hose.

  2. REMOVE NO. 1 COOLING UNIT PACKING


    1. B005VIE

      Remove the No. 1 cooling unit packing.

  3. REMOVE AIR FILTER COVER PLATE


    1. B005UACC01
      B006BJ7 Pinch
      B006DHE Rotate in this Direction
      B006B42 Remove in this Direction

      Lightly pinch the area shown in the illustration and rotate the claw in the direction indicated by the arrow shown in the illustration to detach it.

    2. Pull in the removal direction shown in the illustration to detach the guide and remove the air filter cover plate.

  4. REMOVE AIR FILTER CASE


    1. B005RFT

      Remove the air filter case.

  5. REMOVE CLEAN AIR FILTER


    1. B005THQ

      Detach the guide and remove the clean air filter.

  6. REMOVE SPRING NUT


    1. B005WXM

      Remove the 4 spring nuts.

  7. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. B005T88

      Remove the 3 screws and blower motor with fan sub-assembly.

  8. REMOVE NO. 2 COOLING UNIT PACKING


    1. When reusing the blower motor with fan sub-assembly:

      Click here

  9. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    1. B005URLC01
      *A for LHD
      *B for RHD

      Remove the 4 screws and remove the cover plate.

    2. B005V1ZC01
      *A for LHD
      *B for RHD

      Remove the 2 screws.

    3. Detach the guide and No. 1 blower damper servo sub-assembly.