PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU), Diagnostic DTC:C1691

DTC Code DTC Name
C1691 Back Camera Initialization Incomplete

DESCRIPTION

This DTC is stored when the television camera assembly judges that the back camera initial setting has not been memorized (back camera position setting is incomplete).

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1691

Back Camera Initialization Incomplete

Back camera initial setting has not been memorized (back camera position setting is incomplete)

  • Back camera position setting

  • Television camera assembly

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

Click here

PROCEDURE

  1. ADJUST SETTINGS (BACK CAMERA POSITION SETTING)

    1. Perform the following procedure depending on the memory conditions to register the vehicle information into the television camera assembly.

      1. Back camera position setting.

        Click here

    Result

    Proceed to

    NEXT
    NEXT

  2. CHECK DTC

    1. Clear the DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Clear DTCs

    2. Check for DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Trouble Codes

      Tip:

      • If DTC C1691 is output, perform the back camera position setting again.

      • If DTC C1691 is still output after performing the back camera position setting 3 times, replace the television camera assembly.

    Result

    Result

    Proceed to

    DTC C1691 is not output

    A

    DTC C1691 is output.

    B
    A

    END

    B

    REPLACE TELEVISION CAMERA ASSEMBLY

    Click here