PARKING ASSIST ECU INSTALLATION

PROCEDURE


  1. INSTALL PARKING ASSIST ECU


    1. for LHD:


      1. B006CPJC01
        *a Wire Harness Clamp
        *b Hook
        B006DHE Install in this Direction (1)
        B006B42 Install in this Direction (2)
        B0069GW Install in this Direction (3)

        Attach the hook to temporarily install the parking assist ECU.

      2. Attach the wire harness clamp.

      3. B006APE

        Install the parking assist ECU with 2 bolts.

        Torque:
        10.5 N*m  { 107 kgf*cm, 8 ft.*lbf }
      4. B006FJG

        Connect the 3 connectors.

      5. Attach the wire harness clamp to the connector holder.

      6. Install the front floor carpet assembly front.

    2. for RHD:


      1. B006GBFC04
        *a Wire Harness Clamp
        *b Hook
        B006DHE Install in this Direction (1)
        B006B42 Install in this Direction (2)
        B0069GW Install in this Direction (3)

        Attach the hook to temporarily install the parking assist ECU.

      2. Attach the wire harness clamp.

      3. B006DP8

        Install the parking assist ECU with 2 bolts.

        Torque:
        10.5 N*m  { 107 kgf*cm, 8 ft.*lbf }
      4. B0069US

        Connect the 3 connectors.

      5. Attach the wire harness clamp to the connector holder.

  2. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  5. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  6. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  7. PERFORM CALIBRATION

    Click here