DIFFERENTIAL OIL SEAL(for LH Side) REPLACEMENT

PROCEDURE

1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

   Click hereClick hereClick here

2. REMOVE TRANSMISSION CASE OIL SEAL

   

   1. Using SST, tap out the transmission case oil seal.

      09308-00010

3. INSTALL TRANSMISSION CASE OIL SEAL

   

   *a	-0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.)

   1. Coat the lip of a new transmission case oil seal with MP grease.

   2. Using SST and a hammer, tap in the transmission case oil seal.

      09608-32010

      09950-70010

      09951-07200

      Standard depth

      -0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.)

      Note:

      Do not damage the lip of the transmission case oil seal.

4. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

   Click hereClick hereClick here