PERSONAL LIGHT(for RH Side) INSPECTION

PROCEDURE

  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

    1. E177527E14

      Apply battery voltage to the connector and check the LED illumination condition.

      OK

      Measurement Condition

      Specified Condition

      Battery positive (+) → Terminal 2 (+B)

      Battery negative (-) → Terminal 1 (GND)

      LED illuminates
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.