FRONT DOOR SPEAKER INSTALLATION

PROCEDURE

1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

   
   

   1. Using an air riveter or a hand riveter, install the front No. 1 speaker assembly with 4 new rivets.

      

      Text in Illustration

      *1	Riveter	*2	Mandrel
      *a	INCORRECT	*b	CORRECT

      Note

      
      

      • Do not touch the cone part of the speaker.

      • Do not pry on the rivets with the riveter, as this will cause damage to the riveter and mandrel.

      • Confirm that the rivets are seated properly against the speaker.

      • Do not tilt the riveter when installing the rivets to the speaker.

      • Do not leave any clearance between the rivet heads and speaker.

      • Do not leave any clearance between the speaker and door. Firmly hold the 2 items together while installing the rivets.

      Tech Tips

      Install the rivets in the order shown in the illustration.

   2. Connect the connector.

2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

3. INSTALL DOOR ARMREST COVER

   Click here

4. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

   Click here

5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

   Click here

6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

   Click here