FRONT DOOR SPEAKER INSTALLATION


  1. INSTALL FRONT NO.1 SPEAKER ASSEMBLY


    1. B007UB1E01

      Using an air riveter or hand riveter, install 3 new strike rivets on the front No.1 speaker assembly on the front door panel.

      Tech Tips

      Install the new strike rivets in order as shown in the illustration.

      Note


      • B007W05

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • B007QHR

        Confirm that the rivets are seated properly against the speaker.

      • Do not tilt the riveter when installing the rivet to the speaker.

      • Do not leave any space between the rivet head and speaker.

      • B007TOT

        Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.

    2. Connect the connector.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. B007OJ2E01

      Attach the 12 clips and install the front door trim board sub-assembly LH with the screw.

  3. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (Without Power Window)


    1. Temporarily install the front door window regulator handle assembly, and completely close the front door glass.

    2. B007RTYE01

      Install the front door window regulator handle assembly with front door window regulator handle shaft snap ring at the angle shown in the illustration.