OUTER MIRROR SWITCH INSPECTION
PROCEDURE
INSPECT OUTER MIRROR SWITCH ASSEMBLY
Check the mirror select switch and mirror surface adjust switch.
-
*a
Mirror Select Switch
*b
Mirror Surface Adjust Switch
*c
Component without harness connected
(Outer Mirror Switch Assembly)
Turn the mirror select switch to the L position.
Measure the resistance according to the value(s) in the table below.
Standard Resistance (for left side)
Tester Connection
Condition
Specified Condition
16 (VL) - 22 (B)
19 (M+) - 20 (E)
Up
Below 1 Ω
Off
10 kΩ or higher
16 (VL) - 20 (E)
19 (M+) - 22 (B)
Down
Below 1 Ω
Off
10 kΩ or higher
17 (HL) - 22 (B)
19 (M+) - 20 (E)
Left
Below 1 Ω
Off
10 kΩ or higher
17 (HL) - 20 (E)
19 (M+) - 22 (B)
Right
Below 1 Ω
Off
10 kΩ or higher
Turn the mirror select switch to the R position.
Measure the resistance according to the value(s) in the table below.
Standard Resistance (for right side)
Tester Connection
Condition
Specified Condition
15 (VR) - 22 (B)
19 (M+) - 20 (E)
Up
Below 1 Ω
Off
10 kΩ or higher
15 (VR) - 20 (E)
19 (M+) - 22 (B)
Down
Below 1 Ω
Off
10 kΩ or higher
14 (HR) - 22 (B)
19 (M+) - 20 (E)
Left
Below 1 Ω
Off
10 kΩ or higher
14 (HR) - 20 (E)
19 (M+) - 22 (B)
Right
Below 1 Ω
Off
10 kΩ or higher
If the result is not as specified, replace the outer mirror switch assembly.
-