POWER WINDOW CONTROL SYSTEM UTILITY

  1. CLEAR WINDOW POSITION DATA (Using GTS)

    Note:

    If "Reset Memory" is performed, DTC B2313 will be output.

    1. Turn the power switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / (desired system) / Utility / Reset Memory.

    6. Select the "Reset Memory" to clear the window position data using the GTS.

      Body Electrical > D-Door Motor > Utility

      Tester Display

      Reset Memory