FRONT EVAPORATOR TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • The power window system utilizes a mechanism that the door glass moves down slightly when the door is opened, and that the glass moves up when closing the door in order to prevent the door molding from being damaged. When the battery negative (-) terminal needs to be disconnected for servicing, fully open the driver and passenger door glasses in advance.

  3. REMOVE AIR CONDITIONING UNIT ASSEMBLY (for Automatic Air Conditioning System)

    Click here

  4. REMOVE AIR CONDITIONING UNIT ASSEMBLY (for Manual Air Conditioning System)

    Click here

  5. REMOVE ASPIRATOR (for Automatic Air Conditioning System)

    Click here

  6. REMOVE ASPIRATOR PIPE (for Automatic Air Conditioning System)

    Click here

  7. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  8. REMOVE HEATER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  9. REMOVE COOLER EXPANSION VALVE

    Click here

  10. REMOVE COOLING UNIT CASE SUB-ASSEMBLY (for Automatic Air Conditioning System)

    Click here

  11. REMOVE COOLING UNIT CASE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  12. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

    Click here

  13. REMOVE AIR CONDITIONER TUBE ASSEMBLY

    Click here

  14. REMOVE NO. 1 COOLER THERMISTOR


    1. A004HDP

      Remove the No. 1 cooler thermistor from the No. 1 cooler evaporator sub-assembly.