MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL NO. 2 TURBO PRESSURE SENSOR

   1. Install the No. 2 turbo pressure sensor to the intake manifold with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      If the No. 2 turbo pressure sensor has been struck or dropped, replace it.

   2. Connect the No. 2 turbo pressure sensor connector.

2. INSTALL NO. 1 TURBO PRESSURE SENSOR

   1. Install the No. 1 turbo pressure sensor to the intercooler assembly with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      If the No. 1 turbo pressure sensor has been struck or dropped, replace it.

   2. Connect the No. 1 turbo pressure sensor connector.