NAVIGATION SYSTEM PRECAUTION

Note

After the engine switch is turned off, the navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the engine switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

Note

• When replacing the radio receiver assembly or navigation ECU, always replace it with a new one.

  If a radio receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:




• A communication malfunction DTC may be stored.

• The radio receiver assembly or navigation ECU may not operate normally.

• After replacing the radio receiver assembly, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display, update the software of the navigation ECU.

• After replacing the navigation ECU, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display, update the software of the radio receiver assembly.