AUDIO AND VISUAL SYSTEM(w/ Navigation System), Diagnostic DTC:B1575
| DTC Code | DTC Name |
|---|---|
| B1575 | GVIF Disconnected (from EMV/MM Integrated Device to Multi Display) |
DESCRIPTION
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
B1575 |
GVIF Disconnected (from EMV/MM Integrated Device to Multi Display) |
GVIF disconnected (from Multi-media module receiver assembly to Multi-display assembly) |
|
PROCEDURE
CLEAR DTC
Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
Result
Proceed to
NEXT
CHECK FOR DTC
Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Navigation System > Trouble Codes
OK
No DTCs are output.
Result
Proceed to
OK
NG
CHECK HARNESS AND CONNECTOR (GVIF CABLE)
Check that the digital signal lines between the multi-display assembly and multi-media module receiver assembly are not sharply bent or pinched, and that the connectors are properly connected and there are no other installation problems.
OK
There are no installation problems.
Result
Proceed to
OK
NG
NG REPLACE HARNESS AND CONNECTOR (GVIF CABLE)
REPLACE HARNESS AND CONNECTOR (GVIF CABLE)
Replace the harness and connector (GVIF cable) with a known good one.
Result
Proceed to
NEXT
CLEAR DTC
Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
Result
Proceed to
NEXT
CHECK FOR DTC
Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Navigation System > Trouble Codes
OK
No DTCs are output.
Result
Proceed to
OK
NG
OK END (GVIF CABLE IS DEFECTIVE)