STARTER(w/ Stop And Start System) COMPONENTS
ILLUSTRATION
*1 |
AIR CLEANER CAP SUB-ASSEMBLY |
*2 |
BATTERY |
*3 |
BATTERY BRACKET REINFORCEMENT |
*4 |
BATTERY CLAMP SUB-ASSEMBLY |
*5 |
BATTERY TRAY |
*6 |
FRONT BATTERY BRACKET |
*7 |
NO. 1 ENGINE UNDER COVER |
*8 |
NO. 2 CYLINDER HEAD COVER |
*9 |
RADIATOR HOSE SUB-ASSEMBLY |
- |
- |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
ILLUSTRATION
*A |
for Manual Transaxle: |
*B |
for CVT: |
*1 |
FLYWHEEL HOUSING SIDE COVER |
*2 |
NO. 1 TRANSMISSION CONTROL CABLE BRACKET |
*3 |
STARTER ASSEMBLY |
*4 |
TRANSMISSION CONTROL CABLE ASSEMBLY |
*5 |
STARTER WIRE |
*6 |
STARTER CONNECTOR |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
ILLUSTRATION
*A |
for CVT |
- |
- |
*1 |
PLANETARY GEAR |
*2 |
REPAIR SERVICE STARTER KIT |
*3 |
STARTER ARMATURE ASSEMBLY |
*4 |
STARTER ARMATURE PLATE |
*5 |
STARTER BRUSH HOLDER ASSEMBLY |
*6 |
STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY |
*7 |
STARTER COMMUTATOR END FRAME ASSEMBLY |
*8 |
STARTER INRUSH CURRENT REDUCTION RELAY |
*9 |
STARTER YOKE ASSEMBLY |
*10 |
HARNESS |
*11 |
PLUNGER |
*12 |
RETURN SPRING |
*13 |
MAGNET SWITCH |
*14 |
WIRE HARNESS |
*15 |
PINION DRIVE LEVER |
*16 |
RUBBER SEAL |
*17 |
STARTER DRIVE HOUSING ASSEMBLY |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
 |
High-temperature Grease |
ILLUSTRATION
*A |
for Manual Transaxle |
- |
- |
*1 |
MAGNET STARTER SWITCH ASSEMBLY |
*2 |
PLANETARY GEAR |
*3 |
STARTER ARMATURE ASSEMBLY |
*4 |
STARTER ARMATURE PLATE |
*5 |
STARTER BRUSH HOLDER ASSEMBLY |
*6 |
STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY |
*7 |
STARTER COMMUTATOR END FRAME ASSEMBLY |
*8 |
STARTER YOKE ASSEMBLY |
*9 |
RUBBER SEAL |
*10 |
PINION DRIVE LEVER |
*11 |
STARTER DRIVE HOUSING ASSEMBLY |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
|
High-temperature Grease |