RELAY ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT EFI-MAIN RELAY

    E209082

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      3 - 5

      Battery voltage not applied to terminals 1 and 2

      10 kΩ or higher

      3 - 5

      Battery voltage applied to terminals 1 and 2

      Below 1 Ω

      If the result is not as specified, replace the EFI-MAIN relay.

  2. INSPECT IG2 RELAY

    1. E209082

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      3 - 5

      Battery voltage not applied to terminals 1 and 2

      10 kΩ or higher

      3 - 5

      Battery voltage applied to terminals 1 and 2

      Below 1 Ω

      If the result is not as specified, replace the IG2 relay.