DOOR CONTROL TRANSMITTER (w/ Smart Entry and Start System) INSTALLATION


  1. INSTALL TRANSMITTER BATTERY


    1. B007S5K

      Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter housing case interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.

  2. INSTALL TRANSMITTER BATTERY HOUSING COVER


    1. B007OZ7

      Install the transmitter battery housing cover.

      Tech Tips

      Press down on the entire circumference of the transmitter battery housing cover.

    2. B007S8C

      Install the transmitter housing cover.

    3. B007QYH

      Insert the emergency key into the electrical key transmitter sub-assembly.

    4. Press one of the transmitter switches and check that the LED illuminates.

      OK
      Transmitter LED illuminates when switch is pressed.