AIR CONDITIONING PRESSURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AIR CONDITIONER PRESSURE SENSOR


    1. Remove the attached vinyl tape from the air conditioner pressure sensor installation area of liquid tube sub-assembly A.

    2. Apply a sufficient amount of compressor oil to a new air conditioner pressure sensor O-ring and the fitting surface of liquid tube sub-assembly A.

      Compressor Oil
      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

      Note

      Keep the O-rings and O-ring fitting surfaces free from dirt or foreign matter.

    3. B006GEGC01
      *A for 8GR-FKS
      *B for V35A-FTS
      *a Turn
      *b Hold
      B006DHE Install in this Direction

      Using a 27 mm deep socket wrench, install the air conditioner pressure sensor.

      Torque:
      10.8 N・m  { 110 kgf・cm }

      Note


      • Do not deform the pipe.

      • Do not apply excessive force to the liquid tube sub-assembly A.

      • Make sure not to cut the O-ring while installing it. (Cut O-rings cannot be installed)

    4. B006E9KC01
      *A for 8GR-FKS
      *B for V35A-FTS
      B006AHR No. 2 Cooler Cover
      B006EC9 Connector

      Install the No. 2 cooler cover.

    5. Connect the connector.

  2. INSTALL LOWER ARM BRACKET BRACE SUB-ASSEMBLY LH


    1. for 8GR-FKS:

      Click here

    2. for V35A-FTS:

      Click here

  3. INSTALL LOW PITCHED HORN ASSEMBLY

    Click here

  4. INSTALL HOOD LOCK RELEASE LEVER PROTECTOR


    1. for 8GR-FKS:

      Click here

    2. for V35A-FTS:

      Click here

  5. INSTALL FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  6. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT


    1. for HFC-134a(R134a):

      Click here

    2. for HFO-1234yf(R1234yf):

      Click here

  7. WARM UP ENGINE


    1. for HFC-134a(R134a):

      Click here

    2. for HFO-1234yf(R1234yf):

      Click here

  8. INSPECT FOR REFRIGERANT LEAK


    1. for HFC-134a(R134a):

      Click here

    2. for HFO-1234yf(R1234yf):

      Click here

  9. INSTALL LOWER RADIATOR AIR DEFLECTOR

    Click here

  10. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  11. INSTALL RADIATOR COVER PLATE

    Click here