SEAT BELT CONTROL ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  10. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

  11. REMOVE ECU INTEGRATION BOX LH (for RHD)

    Click here

  12. REMOVE SEAT BELT CONTROL ECU


    1. for LHD:


      1. A005E0I

        Disengage the 2 claws and remove the seat belt control ECU.

    2. for RHD:


      1. A005F1H

        Disengage the 2 claws and remove the seat belt control ECU.